Street Tracker Part 9 - Tires and Wheels Done!

Picture speaks for itself.

Street Tracker Part 8 - Choppin the Tank - Lacing the Wheel

Got the tank to sit how I want it to today. Only problem is that I had to cut out the tunnel to get it that way. Just need to go buy some sheet so I can bend up a new one and get that baby welded in there.

Also got my spokes today. Laced up the wheel in a couple hours. Would have been a lot faster but because the rim is for a rear hub, the nipple holes are at a different angle so on one side you get a little bowing which in turn makes it tough to get the spokes threaded on to the nipples. Once I got the wheel all laced up, I just wasn't comfortable with 9 of the spokes not seating nicely because of the angle of the front hub. Tomorrow I'm just going to loosen all the spokes again, take out those 9 and drill the holes so the angle is less extreme. Never too early to get your son started building wheels.

Street Tracker Part 7 - Lowered the Forks

Pulled the forks apart today. PO had a fork kit in it with new springs and 4" preload spacers. I added in 4" lowering spacers and assembled the forks without the putting the preload spacers back in. It's a little squishy so I might put them back in. I can't tell if it's the height I was going for. Don't want it to look stupid low. Afterall it still has dirt bike suspension. After mulling over the height for a while, I went back out and added another 1.5" spacer to each fork. The height looks much better now plus a rode the tubes up in the triple tree a bit as well. I'll post an updated picture of it tomorrow.

Street Tracker Part 6 - Lowrider

Spent today grinding off the leftovers from the frame. Removed the swingarm first to give me easier access.  Also picked up another rear shock because my XR250 rear shock ended up being the same length. Couple shots of the progress. The new shock lowered the rear nicely and I threw a ratchet strap on the front to see how much I'll need to lower it. Looks to be about 3.5".

Street Tracker Part 5 - Progress

I started tearing into the bike today. Interesting thing happened though. Once I took off the headlight, I checked the neck and guess what it said?... Not 1986 XR600R but 1983 XR500R! Yeah that kind of pisses me off. The guy who sold it to me said that it has the XR600R motor. I don't think he was being dishonest when he sold me the bike. I think that he's just had it for so long that he thought it was the 86 cause that's the motor it has. Would I still have bought it knowing that it's a 1983 frankenbike? Probably. Would I have paid $950 for it still? Probably not. So easy to get duped on craigslist.

There were two big changes between 1983 and 1986 other than just 3 years. First, the 500cc motor was replaced with the 600cc. The other big change was they added an aluminum swingarm. I would much rather have the aluminum swingarm just for the weight. Should have been able to get this bike for at least  $100 less.

Oh well. My bad for not double checking the title before I left. On with the destruction

Street Tracker Part 4 - Got the Foundation for my Tracker

So I just bought the 1985 XR600R. Got if from a real nice guy on craigslist. This is one fast bike. I understand now why it's the king of Baja. Let the deconstruction begin!

Thank God! I Just Sold the Scooter

This little bastard is finally out of my garage. Got $500 for it.